Publicité
Les langues disponibles
Les langues disponibles
Status
1 LED flashes.
Indication of the charge status is not possible while the power tool is in operation or immediately
after operation. If the battery charge status LEDs flash, please refer to the information given in the
Troubleshooting section.
4
Technical data
Weight including battery B22⁄8.0
Rated voltage
Belt speed
Belt dimensions
Belt tension
Arc of contact
Maximum pipe diameter
Ambient temperature for operation
Storage temperature
4.1
Battery
Battery operating voltage
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5
Before use
5.1
Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery.
5.2
Inserting the battery
CAUTION
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible click.
3. Check that the battery is seated securely.
6
English
Meaning
Charge status: < 10 %
2241360
*2241360*
4.1 kg
(9.0 lb)
21.6 V
3.8 m/s ... 8.4 m/s
(12.5 ft/s ... 27.6 ft/s)
30 in x 1 1⁄2 in
4 kg ... 9 kg
(9 lb ... 20 lb)
270°
(4.7 rad)
125 mm
(4.9 in)
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
21.6 V
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
Publicité
