Preparing For Installation - Harvia Mini S1212SV Manuel

Instructions for installation

1. Preparing for installation

Read these assembly instructions carefully and keep them within reach when
using the sauna so that you can look up product information at any time.
These assembly instructions can also be found in the customer service
section of our website: www.harvia.fi.
Important note:
● Before you begin work, check the parts list to ensure that all the individual
parts have been delivered. If you discover any missing parts, notify your
dealer within 14 days of receiving the sauna cabin.
● The room that the sauna is installed in must be dry and ensure an appropri-
ate amount of air circulation.
● The floor must be level and even, preferably a stone or tiled floor.
● A minimum room height of 230 cm is required for the cabin installation work.
● A distance of at least 5 cm from the wall must be maintained.
● The inside of the wooden parts used must not be handled with any impreg-
nating material.
● You need an assistant for the installation.
● Wood is a natural product that can swell, shrink or warp, despite good stor-
age. For this reason, some force may be necessary during the installation.
● All screw fittings must be pre-drilled.
Attention!
The electrical connection may only be performed by a qualified electrician
or similarly qualified person.
p. 3/14
EN