Publicité
Vicks
Waterless Tabletop Vaporizer
®
Lid
Nightlight
VapoPad
Tray
Base
Using Your Vicks Waterless
Tabletop Vaporizer
Read all instructions before using this appliance.
Use Vicks VapoPads
designed to work with the heat of the Waterless Tabletop Vaporizer to gradually release
soothing aromatic vapors.
Directions:
1.
Fully unravel cord. Failure to do so could cause overheating and possible fire hazard.
Do not use with extension cords or power strip. Place Waterless Tabletop Vaporizer on
a flat, stable surface for use.
2.
Open the lid of the Waterless Tabletop Vaporizer
3.
Place one VapoPad in the VapoPad Tray.
4.
Lower lid and press down firmly to lock.
5.
Turn the unit on using the switch.
6.
Adjust to desired vapor setting for desired scent release.
7.
Each pad is designed for single use and will last from 4 - 8 hours depending on vapor setting.
Waterless Tabletop Vaporizer will feel warm to the touch. Be careful when handling.
When vapor therapy treatment is completed, move On/Off switch to the Off position. The
lamp will go out. Disconnect plug from electrical outlet. Allow the Waterless Tabletop
Vaporizer to cool before moving or replacing the pad (see Care and Cleaning section).
VapoPad Recommended Usage:
• Not recommended for infants under 10 pounds.
• For children between 10-22 pounds do not use more than 2 pads in a 24 hour period.
VapoPad Ingredients
WARNING:
fingers in mouth after touching scent pad. Oils in the pad could act as an irritant to eyes.
with your Waterless Tabletop Vaporizer. Each pad is specifically
®
: Eucalyptus Oil, Menthol, Glycol, Cedar Leaf Oil & Others
(VSP-19 / VSP-19-CAN)
Do not rub face or eyes after touching scent pad. Do not put
On/Off
switch with
3 vapor settings
Publicité
