Operating Controls; Protective Equipment; Using For The First Time; Operation - Wolf Garten LYCOS E/500 H Notice D'instructions Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
EN
Structure
MTD Products AG
Industriestraße 23
D-66129 Saarbrücken
Hedge Trimmer
LYCOS E/XXX X
41XXXXXX650
XXXXXXXXXXX
1 Guaranteed sound level
2 Protection class/IP code
3 CE label
4 Manufacturer
5 Device group
6 Model name
7 Model number
8 Serial number
9 Power
10 Engine speed in rpm
11 Weight
12 Rated voltage, kind of current, frequency
13 Disposal instruction
14 Year of manufacture

Operating controls

Operating elements G
1 Handle
2 On/off switch on handle
3 Housing
4 Bow-shaped handle
5 On/off switch on bow-shaped handle
6 Shield
7 Cutting blade
8 Impact protection (depending on the model)
9 Cable with plug
10 Cable strain-relief device
11 Motor-/gearbox unit
12 Protective cover
24
xxx
XXX W
2019
XXXX min -
1
XX kg
230V~ 50Hz

Protective equipment

Protective equipment G
Shield   [6]
The shield protects your hands ensuring easy cut-
ting with a good view of the cutting area.
Impact protection [12]
The projecting guide rail protects you against
unpleasant impacts, e.g. recoil moments, if you hit a
solid object (wall, floor, etc.).
Two-handed safety switch [2], [5]
Switching on and operation of the hedge trimmer
requires both hands. One hand operates the on/off
switch on the handle, the other hand operates the
on/off switch on the bow-shaped handle. If one or
other of the switches is released, the cutting blade
automatically comes to a standstill.

Using for the first time

Lead the cable through the strain relief A 1
Lead the cable through the strain relief in ac-
Î
cordance with the figure (prevents unintentional
release of the plug connection).

Operation

Operating times
Check with your local authorities to determine if
Î
there are any operating time limitations.
Switching the device on B
Injuries or material damage.
ÂOnly use the device with the obligatory
protective equipment.
ÂOnly switch the hedge cutter on when
your hands and feet are out of range of
the cutting mechanism.
With one hand, press and hold the on/off switch
Î
on the bow-shaped handle.  1
Then, with the other hand, simultaneously press
Î
the on/off switch on the handle. 2
3 The device is in operation.
Operating controls
CAUTION!

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lycos e/420 hLycos e/600 hLycos e/700 h

Table des Matières