Unit Of Measure - BGS technic 6648 Mode D'emploi

7.2.1 Spark IGN Required Monitors
In this menu, the operators can configure monitors for spark ignition cars (gasoline engines).
To configure spark IGN required monitors:
1. Use the UP/DOWN key to highlight Spark IGN Required Monitors from menu and press the OK
key to confirm.
2. The custom monitors selection screen displays.
3. Use the RIGHT key to select or deselect a monitor or press the LEFT key to deselect all the
monitors. Press the OK key to confirm and ESC key to cancel.
NOTE
The number to the upper right corner of display indicates the total number of optional monitors and
sequence of currently selected monitor.
7.2.2 Compression IGN Required Monitors
In this menu, the operators can configure monitors for compression ignition cars (diesel engines).
To configure spark compression required monitors:
1. Use the UP/DOWN key to highlight Compression IGN Required Monitors from the menu and
press the OK key to confirm.
2. The custom monitors selection screen displays and Use the RIGHT key to select or deselect a
monitor or press the LEFT key to deselect all the monitors. Press the OK key to confirm and ESC
key to cancel.
7.2.3 Allowed INC Monitors
Emissions tests vary depending on the geographic or regional area in which the vehicle is registered.
This tool provides a more flexible way to meet different standards, which allows the user to select 0,
1, 2, 3 INC monitors in test.
To configure allowed INC monitors:
1. Use the UP/DOWN key to highlight Allowed INC Monitors from the menu and press the OK key to
confirm.
2. The custom INC monitors selection screen displays and scroll with the up and down arrow keys
to select. Press the OK key to confirm and ESC key to cancel.
7.2.4 Reset Factory Default
This menu will allow the users to restore the default configuration settings in the Configure Monitors
menu, and delete any customized settings. In this case, it will include all the available monitors for the
Spark IGN Required Monitors and Compression IGN Required Monitors. Still the Allowed INC
Monitors will be set to 1.
To reset factory default:
1. Use the UP/DOWN key to highlight Reset Factory Default from the menu and press the OK key
to confirm.
2. A message prompting to reset factory default displays. Answer Yes to confirm the request or
answer No to abort and return.

7.3 Unit of measure

Unit of measure opens a dialog box that allows you to choose between US customary or metric units
of measure.
To change the unit setup:
1. Scroll the UP/DOWN keys to highlight Unit of Measure from Setup menu and press the OK key.
2. Press the UP/DOWN arrow key select an item and press the OK key to save and return.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
14
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed