Philips EverFlo Mode D'emploi page 13

EverFlo / EverFlo Q User Manual
Oxygen
Oxygen Concentration*
(All Models except
as noted below)
Models 1020007, 1020008,
1039367, 1039368, 1104000
* Device operation above or outside of the voltage, LPM, temperature, humidity and/or altitude values specified may decrease oxygen
concentration levels.
** Oxygen flow rate <1 LPM requires low range flow meter accessory.
Maximum output pressure limited to 6.5 PSIG (44.8 kPa).
Sound Level
Models 1020000, 1020001
1020002, 1020003
1020004, 1020005,
1039362, 1039363
102002BR, 102003BR
1020006, 1020008
1020009, 1020010
1020011, 1020012
1020013, 1020016,
1020017, 1020020
1039366, 1039364
1039365, 1039368
1039370, 1102443
1020007, 1020014
1020015, 1039367
Classification
The EverFlo / EverFlo Q Oxygen Concentrator is classified as:
• IEC Class II Equipment
• Type BF Applied Part
• IPX1 Drip Proof
• Not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous oxide.
• Continuous Operation
Disposal
Separate collection for electrical and electronic equipment per EC Directive 2012/19/EU. Dispose of this device in
accordance with local regulations.
12
90-96% from 1 to 5 LPM**
87-96% from 1 to 5 LPM**
45 dBA typical
43 dBA typical
1104000
<40 dBA typical