Velleman HQ-Power PROMIX08 Mode D'emploi page 6

5. Set the MIC/LINE selectors [6,9] to MIC if a microphone is connected
to the input; otherwise set to LINE.
6. Connect the output connectors [4] to an amplifier (not incl.).
7. Switch the PROMIX08 on [2] first, then switch on the input devices.
8. Use the input volume regulators [11,12] to adjust the volume of the
individual inputs [5].
9. Use the output volume regulators [7,9] to adjust the volume of the A
and B output channels [4].
8. Switching Off
1. Set all volume regulators [7,10,11,12] to zero.
2. Switch off any input devices (microphone, CD player...) first, then
switch off the PROMIX08.
3. Unplug all inputs and outputs.
4. Unplug the power adapter from the mains. If you are using the
battery, remove it from the device if it will not be used for a long time.
9. Cleaning and maintenance
•
All screws should be tightened and free of corrosion.
•
Disconnect the device from the power supply or remove the battery
before maintenance activities.
•
Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.
•
There are no user-serviceable parts.
•
Contact your dealer for spare parts if necessary.
10. Technical Specifications
power supply
dimensions
weight
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device.
For more info concerning this product and the latest version of this
manual, please visit our website www.hqpower.eu.
The information in this manual is subject to change without prior
notice.
V. 02 – 14/01/2013
9 VDC adaptor (not incl., 9 VDC, min. 500 mA) or
9 V battery (type 6LR61, not incl.)
150 x 100 x 60 mm
545 g
PROMIX08
6 ©Velleman nv