Publicité
Les langues disponibles
Les langues disponibles
2. Loosen the 5/8" dog point screws so the lift bracket can be removed from the frame bracket.
Use the 1/2" carriage head bolt, flat washer, lock washer and hex nut to hold the frame brackets
in place. The bottom carriage head bolt should be in the hole closest to the underside of the
trailer frame. Tighten all (4) ½" carriage bolts to 45-55 ft.-lbs.
The frame and lift brackets can be
mounted on either the driver side or
passenger side of the trailer and MUST be
mounted to the trailer frame as shown. DO
NOT mount the frame brackets on the
inside of the frame!
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty Information / Tech Support /
Product Updates. 2021 Keystone Automotive Operations Inc. All Rights Reserved. 07/27/2021-Rev1
Page-4
Publicité
