Publicité
Les langues disponibles
Les langues disponibles
Burner and lightpost assemBly
1. Locate 4 lightpost panels that are packaged together. Assemble 3
of the pieces with 4 screws (H). Note lip of lamp post panel should
be placed behind connecting panel, not overlapping panel.
2. Place lightpost top over panel assembly aligning screw holes.
Attach with 3 screws (H).
Completed lightpost assembly.
4
Lip of panel behind
connecting panel
3. Pilot light and wiring has been placed inside top of burner as-
sembly for shipping. Carefully remove pilot from inside assembly
and let wiring and pilot hang down back of assembly.
4. Place lightpost panels and top assembly on top of burner
assembly aligning back side of each assembly. Attach with 3
screws (H).
www.desatech.com
122789-01A
Publicité
