Publicité
Les langues disponibles
Les langues disponibles
Base assemBly
1. Turn base upside down. Attach 2 wheels, 2 hex bolts (A) and 2
nuts (J). Do not overtighten.
2. Attach 4 base feet to base weight with 4 washers (B) and 4 screws
(A). Feet will install over raised areas underneath base weight.
2
3. Being careful not to scratch paint, lay cabinet base onto back side
(use foam packaging block to support rear top of cabinet base).
Align holes in bottom edges of cabinet base with holes in base.
Attach with 1 screw (C), 1 washer (D) and 1 nut (E) for each of
the 9 holes. Set assembly upright.
4. Install chain retainers ("S" hooks) to upper edges of cabinet
base.
www.desatech.com
122789-01A
Publicité
