Télécharger Imprimer la page

BIEMMEDUE JUMBO 65 M Livret D'entretien page 18

Generateurs d'air chaud

Publicité

Les langues disponibles
  • FR

Les langues disponibles

GB
VENTILATION
When the control knob is turned to the symbol
ates in continuous fan mode.
MAINTENANCE
Warning
The following operations must be carried out by quali-
fied personnel only.
Before carrying out any maintenance operation the
heater must be disconnected from the mains. Therefore:
• Stop the machine as instructed above
• Turn off the disconnecting switch on the electric
switchboard.
• Wait until the heater has cooled.
CLEANING THE HEAT EXCHANGER AND THE COMBUSTION CHAMBER
For the heater to operate efficiently the heat exchanger and com-
bustion chamber must be cleaned after a period of prolonged use and
more frequently if too much soot builds up. Soot builds up when there
is not enough chimney draft, when the fuel is of very poor quality,
when the burner is regulated incorrrectly or when the heater is
switched on and off too frequently. If the heater starts vibrating when it
is turned on there is probably too much soot.
To get at the heat exchanger (1) take off the front panel (3) and
then remove the smoke box panel (2) and remove baffle plates (7). To
get at the combustion chamber (4) remove the burner (5).
CLEANING THE FAN
Remove any dirt or extraneous material from the mesh of the aspi-
ration grill (6) and if necessary clean the propeller with an air-suction
tool.
1
5
CLEANING THE BURNER
For the heater to work efficiently the burner must be serviced reg-
ularly by an Authorized Service Technician. All cleaning, servicing and
regulation operations must be carried out as indicated in the Burner In-
struction Manual.
Warning
After every type of technical maintenance, please verify
that the machine starting regularly.
the heater oper-
7
3
2
6
4
Fig.4
TRANSPORTING AND MOVING THE HEATER
To move the Jumbo use the front handles and back wheels.
Warning
Before moving the unit:
• Turn it off as indicated above.
• Disconnect electricity by pulling out the plug.
• Wait until the heater cools down
Suitable equipment must always be used when moving a unit and
the instructions given above must be scrupulously adhered to.
Warning
Never try to lift the heater manually. Doing so could re-
sult in physical injury.
18

Publicité

loading

Ce manuel est également adapté pour:

Jumbo 65 tJumbo 90 mJumbo 90 tJumbo 90 m/cJumbo 115 mJumbo 115 t ... Afficher tout