Maintenance; To Order - Chauvin Arnoux C.A847 Notice De Fonctionnement

I humidimetre materiaux

Masquer les pouces Voir aussi pour C.A847:

Table des Matières

Les langues disponibles

Only use specified spare parts for maintenance purposes. The manufacturer

cannot accept any responsibility for accidents occurring following repairs

carried out outside its after-sales department or approved maintenance

network.

6.1 Changing the battery

•

The battery must be replaced as soon as the "low batt" LED lights up

Remove the yellow protective casing without removing the prod

protection cover (the instrument remains switched off).

Unscrew, then remove by pushing the battery lid backwards

Replace the old battery with a 9V battery (6LR61 or 6LF22 type)

6.2 Cleaning the casing

Clean the unit with a cloth and a little soapy water. Clean off with a damp

cloth.

Do not use solvents.

6.3 Metrological Checks

It is essential that all measuring instruments are regularly calibrated.

For checking and calibration of your instrument, please contact our

accredited laboratories (list on request) or the Chauvin-Arnoux subsidiary

or Agent in your country.

6.4 Repair

For all repairs under guarantee or outside guarantee, please return the

device to your distributor.

C.A 847..................................................................... P01.1563.02Z

Supplied with a shockproof cover, a 9V battery and these operating

instructions.

Spare parts :

9V battery....................................................................... P01.1007.32

6. MAINTENANCE

Table des Matières

Table des Matières