Comelit 41SPG000 Manuel Technique page 11

Examples:
1. The displayed address is
010.
2. The displayed address is
100.
3. The displayed address is 099 and the next pressing of the
009. In that case, there is no transfer to the most significant digit because the cursor is under the middle
digit of the address.
New Address 001
Wait please
New Address 001
Successfully
Example: To set address 115 to a device do the following:
Set address
Check address
Read parameters
Save parameters
(Enter)
New Address 001
Enter Address
(Right)
New Address 001
Enter Address
(Edit)
New Address 101
Enter Address
(Right)
New Address 101
Enter Address
(Edit)
New Address 111
Enter Address
(Right)
New Address 111
Enter Address
4 x (Edit)
009 and the next pressing of the
099 and the next pressing of the
Press the (Enter) button to start the writing procedure. While the
addressing procedure is running the screen displays:
The writing procedure completes when the screen displays:
Choose the "Set address" start menu – scroll with "UP" and "Down"
buttons if necessary.
Press the "Enter" button.
"New address" setting screen. The setting always starts from the least
significant digit of the address.
Press "Right" button to move to the first digit of the address.
The cursor is under the first digit of the address.
Press "Edit" button to increase the digit with one unit.
The first digit is set. Now move to the second digit.
Press "Right" button to move to the next digit of the address.
Now you have to set the second digit of the address.
Press "Edit" button to increase the digit with one unit.
The second number is set.
Press the "Right" button to move to the last digit.
Now you have to set the last digit of the address.
Press "Edit" button 4 times to increase the digit with four units.
41SPG000 – Instruction Manual
(Edit) button will increase the address to
(Edit) button will increase the address to
(Edit) button will change the address to
11