Installation
4-Channel (Stereo)
Source Unit
** For high level input; cut supplied input harnesses
then use the wire harness color codes below.
Amplifier
WIRE HARNESS COLOR CODE
FRONT
LEFT
(+) WHITE
LEFT
(–) WHITE/BLACK
RIGHT (+) GRAY
RIGHT (–) GRAY/BLACK
Switched 12V to REM
REAR
LEFT
(+) GREEN
LEFT
(–) GREEN/BLACK
RIGHT (+) PURPLE
RIGHT (–) PURPLE/BLACK
2
2
2
MIN
MIN
MIN
Connect to chassis ground of vehicle
* Keep grounds as short as possible
Fuse
Less than 18"
POS
2
MIN
ATVs, Golf Carts or Motorcycle
When using amplifiers on ATVs, Golf Carts or
Motorcycles, Rockford Fosgate recommends to
run both GND (negative) and B+ (positive) cables
from the amplifier directly to the battery.
* Keep grounds as
short as possible
NEG
illus.-2.1
7