Assembly Instructions - Kenmore Intuition BU4050 Manuel D'entretien Et D'utilisation

Please pay special attention to these hazard alert boxes, and follow any
instructions given. WARNING statements alert you to such hazards as fire,
electric shock, burns and personal injury. CAUTION statements alert you to
such hazards as personal injury and/or property damage.
Before assembling the vacuum cleaner, check the PACKING LIST (page 2). Use this list to
verify that you have received all the components of your new Kenmore Intuition
Upright Vacuum Cleaner.
1. To place the body onto the nozzle, carry
the body over the nozzle and align the
nozzle neck with the guides in the body
and slowly drop into place until a 'click'
is heard.
Body
Nozzle
2. Insert the handle into wand until you
hear a 'click'.

ASSEMBLY INSTRUCTIONS

Handle
Wand
- 8 -
3. Locate the wand parallel with the body;
make sure the protrusion is under upper
slot as shown. Then push the wand to
fit the body and then insert downward
into the nozzle neck. Make sure the
protrusion I is locked into upper slot
and protrusion II into lower slot. A 'click'
can be heard once you finish the wand
assembly.
Upper
Slot
Lower
Slot
®
Bagged
Protrusion
I
Protrusion
II