Recharging The Lithium Battery - Fisherbrand 15249805 Manuel D'utilisation

is adjusted exactly to the desired volume.
- Dispensing
-Slowly press the lower pipette button. The dispending
speed is dependent on the amount of pressure on the pipetting
button as well as the setting of speed controller. When the mode
switch is in the motor powered delivery position.

6 - Recharging the Lithium Battery

• Attention!
- Use original manufacture AC adapter only. Using a different AC
adapter can damage both the instrument and the lithium battery.
• Green LED lashes : lithium battery charge is suficient
• Red LED lashes : remaining lithium battery charge is suficient
maximum of two hours of pipetting; charging of lithium battery is
recommended
• LED is not lighting : inish pipetting activity and charge lithium
battery.
• Recharging procedure
1. Temperature range for recharging: +10° C to +35°C (+50°F to
95°F)
2. When the AC adapter is initially connect the red LED on the
instrument light continuously.
3. After 2 hours of charging the AC adaptor switches to a
pulsed, long term charging mode ( the green lighting)
Note:
• The charging system is design to prevent the lithium battery
from over chagrining and minimizes the lazy battery effect. The
maintain maximum lithium battery capacity, it is best to charge
the battery only when the slowly lashing or quickly lashing LED
indicates charging is needed.
• The instruments be used during recharging.
www.eu.fishersci.com/fisherbrand
7