Smart Grid Function - Signature Kitchen Suite UPFXC2466 Serie Manuel Du Propriétaire

Open Source Software Notice
Information
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit http://
opensource.signaturekitchensuite.com. In
addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
Signature Kitchen Suite will also provide open
source code to you on CD-ROM for a charge
covering the cost of performing such distribution
(such as the cost of media, shipping, and
handling) upon email request to opensource@
signaturekitchensuite.com This offer is valid
for three (3) years from the date on which you
purchased the product.

Smart Grid Function

When the refrigerator operates in Smart Grid
mode, the Smart Refrigerator function can
control energy usage or delay the operation
of some functions to save energy during peak
usage periods.
• You can override the Smart Grid function
any time (using the Smart Grid button or
application).
• To use the Smart Grid function, you need to
register your application with your electric
utility company, provided that, your electric
utility company supports the function. In
other words, the Smart Grid function will not
be available if your electric utility company
does not support the function or does not
have the capability to support the function.
Smart Grid Application Features
Smart Saving_Demand Response
You can lower energy usage based on Demand
Response (DR) signals from the utility company.
If the refrigerator is operating in Smart Saving
mode according to the DR signal, you can see a
pop up.
Seasonal Energy Savings
Lower energy usage based on time period.
SMART FUNTIONS
Using the Smart Grid Function
This feature responds to notification events
from your utility company to run high energy
consuming tasks during off-peak periods when
demand is lower. These notification events are
known as Demand Response signals.
If the refrigerator receives a Demand Response
signal from the utility company, the refrigerator
will turn on the Grid LED on the refrigerator
display and control its power consumption
according to the signal.
The refrigerator will respond to the signals
received from the utility company as long as
product performance is maintained.
If the refrigerator receives a Demand Response
signal, the refrigerator will operate in Delay
Appliance Load (DAL) or Temporary Appliance
Load Reduction (TALR) mode.
Delay Appliance Load (DAL)
The refrigerator responds to a DAL signal by
providing a moderate load reduction for the
duration of the delay period.
This mode controls functions that consume a lot
of energy such as adjusting the cooling system,
running the defrost cycle, and making ice.
• When the refrigerator operates in DAL
mode, the Grid LED is illuminated on the
refrigerator display.
• DAL mode is automatically deactivated after
the period stipulated by the DAL signal (max.
4 hours) or when you override the Smart
Grid function.
43