Measuring Clearances; Removing/Assembling The Refrigerator Door Handles - Signature Kitchen Suite UPFXC2466 Serie Manuel Du Propriétaire

Measuring Clearances

• Check the dimensions of the product and the
installation path to ensure there is sufficient
room to move the refrigerator through doors
or narrow openings.
• If an opening is too narrow to fit the
refrigerator through, remove the refrigerator
doors. See Removing/Assembling the Doors
and Drawers in this manual.
• The installation location chosen for the
refrigerator should allow space behind the
unit for connections and airflow and space in
front to open the doors and drawers.
24" (61 cm)
Removing/Assembling the
Refrigerator Door Handles
When it is necessary to move the
refrigerator through a narrow opening,
removing the doors is the recommended
procedure. If it is necessary to remove
the handles, follow the directions below.
Tools Needed
3/32 in. Allen wrench
¼ in. Allen wrench
Removing the Handles
1
Loosen the set screws
Allen wrench and remove the handle.
2
Loosen the mounting fasteners
connect to the refrigerator
2" (5.08 cm)
door and handle using
1
a /
4
remove the mounting
fasteners.
Assembling the Handles
1
Assemble the mounting fasteners
both ends of the handle using a
Allen wrench.
2
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and
tightening
the set
screws
with a
Allen wrench.
INSTALLATION
NOTE
with a
in. Allen wrench, and
3
/ in.
32
11
3
/ in.
32
that
at
1
/ in.
4
1 pt