Reversing The Door Swing - GE DPGT650 Manuel Du Propriétaire Et Instructions D'installation

REVERSING THE DOOR SWING (if desired)
REMOVE FILLER PLUGS
1
Open the door and remove the filler plugs opposite
the hinges.
REMOVE DOOR
2
• With the door completely open, remove
the BOTTOM screw from each hinge on
the dryer face.
• Insert the screws about halfway into the TOP
holes, for each hinge, on the opposite side (where
you removed the filler plugs). Apply firm pressure
to get the screw started in new holes.
• Loosen the TOP screw from each hinge on the
dryer face halfway. With one hand holding the
top of the door and the other hand holding the
bottom, remove the door from the dryer by
lifting it UP and OUT.
Installation Instructions
31
REMOVE HANDLE
3
Remove the screws holding the handle and two
spacers.
Rear of Door
REVERSE DOOR CATCH
4
Remove the door catch and filler plate. Install them
on opposite sides of the door.
Filler
Plate
Catch