Table des Matières
Publicité
FINAL SETUP (cont.)
DRYER STARTUP
3
Press the POWER button.
NOTE: If the dryer has been exposed to
temperatures below freezing for an extended
period of time, allow it to warm up before pressing
POWER. Otherwise, the display will not come on.
The dryer is now ready for use.
Installation Instructions
30
SERVICING
WARNING –
to disconnection when servicing controls. Wiring
errors can cause improper and dangerous
operation after servicing/installation.
For replacement parts and other information,
refer to the Owner's Manual for servicing phone
numbers.
Label all wires prior
Publicité
Table des Matières
