Spektrum AR6400LBL Guide De L'utilisateur page 8

EN
To Change CH5 to X-port or X-port to CH5
Note: When X-Port is active, CH5 and CH6 are not available; however, reversed aileron (CH2) is still
available.
1. Ensure the receiver and transmitter are bound
2. Plug the X-Port accessory or the optional servo into the X-Port/CH5
3. Turn the transmitter on
4. Move the THRO stick to the full throttle position
5. Move control sticks to the corresponding position to change between the available options (see
illustration)
6. While holding this position, plug the battery into the receiver; power receiver
7. The LED on the receiver will go solid and within 5 seconds the LED will flash 3 times quickly,
indicating the option is now changed
8. Disconnect battery from receiver
9. Turn transmitter off
Mode 2
THRO/RUDD
Optional Support Items
Please see www.horizonhobby.com for a complete list of items.
CH5/X-port
1. Full THRO
2. Right RUDD
ELEV/AILE ELEV/RUDD
8
Mode 1
THRO/AILE