EN
•
Select "Install" and wait for the installation is completed.
4. After completed the Active X installation, close the Internet Explorer Web Page and
launch it again, put the IP Camera Address.
5. Open the browser and enter the camera's IP address (http://192.168.1.168) and
the window for creating the Administrator password will appear. It is necessary to
set the password immediately to protect your privacy. The password should
contain a combination of 8 to 15 characters. Make a note of the password and
keep it in a safe place.
6. Confirm with OK button. At this point, another window will appear where the user
can choose and configure how to recover his password if the user loses it.
DS1099-121A
38