Drawer Front Alilgnment - Steelcase TS Storage Directives D'installation

®
Drawer Front Alignment
NOTE: Only for minor drawer front
alignment adjustments.
-Extend drawers.
-Use a T20 torx tip to loosen the four (4) screws holding the
drawer front to the drawer body. Two (2) screws near top
and two (2) screws near bottom.
-Adjust drawer front to obtain desired alignment.
-Tighten screws.
NOTE: Ensure adequate spacing so drawer
fronts do not rub against adjacent components.
For further assistance please call
1-888-STEELCASE
Box drawer
1-1/2 Hi Lateral file drawer
File drawer Lateral file drawer
Page 10 of 57
P/N 939504734
Doc # 70305 Rev K