Publicité
Les langues disponibles
Les langues disponibles
EN
7 Configuration of other devices
With the 1099/212 camera already configured and connected in 4G, you can connect to the Wi-
Fi network of the camera (Wi-Fi SSID: "MIFI_...", Wi-Fi password: 1234567890) other Urmet
Wi-Fi cameras (e.g. models: 1099/214, 1099/216 etc.). All cameras will be available via the
Internet from the Urmet V-Stream app.
IMPORTANT: It is recommended not to connect more than 4 cameras to the 1099/212 Wi-Fi
network of the camera.
You can also use a network cable to connect an Urmet Series NVR/HVR (WAN port) video
recording device to the network connector of the camera (WAN port). The HVR/NVR will
automatically receive an IP address assigned by the 1099/212 camera DHCP service:
IMPORTANT: When recording cameras on NVR/HVR it is recommended not to connect more
than 3 cameras to the 1099/212 Wi-Fi network of the camera
DS1099-063B
20
Publicité
