Télécharger Imprimer la page

Urmet 1099/212 Guide Rapide page 14

Masquer les pouces Voir aussi pour 1099/212:

Publicité

Les langues disponibles

Les langues disponibles

EN
3 Installation
It is advisable to proceed as follows for correct camera installation and
configuration:
1.
Make sure that the unit to be connected is not powered before starting the
installation procedure. Fit each of the two aerials (black aerial for 4G, white
aerial for Wi-Fi) supplied on the respective camera connector.
2.
Insert the nano-SIM (not included) into the appropriate slot of the camera
with the device switched off (see next image).
IMPORTANT: It is recommended to disable the SIM card PIN from your
mobile phone or tablet before inserting the SIM card into the camera. If
necessary, refer to section 5 of this guide to disable the PIN of the SIM
already inserted in the camera.
IMPORTANT: Some mobile network operators can introduce major delays
or blockages in camera connections.
3.
When recording to a micro SD card (not included), insert the SD memory card
into the SD memory card slot of the camera when the power is off (see next
picture). Format the SD card from camera settings on the web page or from
the app.
4.
Place the camera in a location with good 4G signal reception and then power
the camera (power supply not supplied). Within a few minutes of switching
on, the camera automatically connects in 4G to the internet network.
5.
To check the connection of the camera in 4G to the internet, connect a
personal device such as a smartphone/tablet/PC to the Wi-Fi network of the
camera (Wi-Fi SSID): "MIFI_...", Wi-Fi password: 1234567890) or connect a
PC via cable to the network connector of the camera.
6.
The integrated 4G/Wi-Fi router provides internet access to the camera and
also to devices connected via Wi-Fi or cable to the camera.
For remote viewing of the camera from a smartphone/tablet device, see
section 4 of this guide.
To access the advanced configurations of the built-in 4G/Wi-Fi router of the
camera, see section 5 of this guide
4 Viewing from APP
With the camera already configured and connected in 4G, connect the smartphone to the Wi-Fi
network of the camera (SSID Wi-Fi : "MIFI_...", Wi-Fi password: 1234567890):
DS1099-063B
14

Publicité

loading