Publicité
Les langues disponibles
Les langues disponibles
Each time it is pressed, it shows the program in activation
I
and the pre-set desired temperature for a few seconds H
I; then the temperature detected reappear.
Exclusion from thermal control
J
To activate this mode press button
until the
icon appears.
If the system is in "Heating" mode, the frost-protection
function remains on.
The frost-protection temperature set J is shown
for a few seconds, then the temperature detected is
displayed K.
K
If the system is in "Cooling" mode, the control will be
totally excluded.
Manually forcing the desired temperature
L
With any heating management program active L (Eco,
arrows M to change
Comfort, Night), press the
the desired temperature set.
The new desired temperature is shown in place of
the temperature detected, any active program icon
disappears to show that the programming has been
changed. After the video times out the temperature
M
detected reappears.
Note. This forcing is valid until the next time the heat
management program is changed.
Publicité
