Publicité
Les langues disponibles
Les langues disponibles
D
E
F
G
H
Changing the system's operating mode
Touch the area shown in figure D and continue touching
until a beep indicates the mode is changed between:
System in Heating mode
System in Cooling mode
System off
System in Frost-protection mode
When the system is off ( ), the image in figure E is
displayed on the screen for a few seconds, to indicate
that the system is off; Then the temperature detected
will reappear.
When the system is put into frost-protection mode
F ( ) the arrows let you set the minimum ambient
temperature tolerated; Then the temperature detected
will reappear.
Note. Programmable frost-protection temperature:
Minimum 3.0°C – Maximum 16.0°C.
Choosing a heat management program
button in figure G it is possible to
By pressing the
choose 3 levels of desired temperature.
The three pre-set temperature levels are:
In Heating Mode
Comfort
20.0 °C
Eco
18.0 °C
16.0 °C
Night
In Cooling mode
Comfort
24.0 °C
Eco
26.0 °C
28.0 °C
Night
Publicité
