Publicité
Les langues disponibles
Les langues disponibles
CLEANING SOLUTIONS
Cleaning solutions can be classified into two types: those consisting of a cleaning solution mixed with water,
and solvents.
The most common cleaning method is with water, as it has an acceptable capacity to dissolve inorganic
substances. However, it is extremely limited in dissolving organic substances. For this type of compound,
water is a good medium for the dispersion of dirt particles, and a good basis for specific detergents that
dissolve organic substances.
In most cases a mixture of water and domestic washing up liquid can be used as a cleaning solution.
Nevertheless, when due to the amount or nature of dirt to these cleaning solutions are not enough, specific
solvents for ultrasonic baths should be used. Under no circumstances should inflammable solvents or
environmentally dangerous products be used.
DIRT REMOVING PROCESS
The ultrasounds generate
myriads of small bubbles.
TECHNICAL SPECIFICATIONS
Voltage:
Ultrasound power:
Heating power:
Ultrasound frequency:
Outside dimensions (height x width x depth):
Tank dimensions:
Tank capacity:
Heating temperature:
Tank material:
Timer:
Weight:
The ultrasounds make the
bubbles implode constantly
and impact against the
object's surface
240 x 300 x 165 mm
100 x 240 x 135 mm
The impact breaks up the dirt
into many grains and
separates them from the
object's surface. The grains
remain in the water.
Ref. 100150
230 V, 50 Hz
120 W
100 W
40 kHz
290 x 365 x 180 mm
150 x 300 x 150 mm
2.8 L
1 - 80 ºC
Sainless-steel
1 - 99 minutes
3,9 kg
Ref. 100152
180 W
200 W
5.8 L
5,4 kg
Publicité
