Machine Start And Stop; Starting The Machine; Stopping The Machine - KENT Razor 20 Instructions D'utilisation

ENGLISH

MACHINE START AND STOP

Starting the machine

1. Prepare the machine as shown in the previous paragraph.
2. (Only for RAZOR 20T): Insert the ignition key (80) and turn it to "I".
(Only for RAZOR 20): Press the switch (71) and/or (73) to turn the machine on.
Check that the green warning light (81a) turns on (charged batteries).
If the yellow or red warning light (81b or 81c) turns on, turn the ignition switch back to "0" and charge the batteries (see the
procedure in Maintenance chapter).
3. Drive the machine to the working area:
• By pushing it with the hands on the handlebar (2) (only for RAZOR 20).
• By keeping the hands on the handlebar (2) and pressing the paddle (77) forward to move forward, and backwards to move
in reverse (only for RAZOR 20T). The maximum forward speed can be adjusted with the adjuster (78).
4. Lower the squeegee (25) with the lever (10).
5. Lower the brush/pad-holder deck by pressing the pedal (11).
6. Press the brush/pad-holder and vacuum system switch (71).
7. Press the washing water fl ow control switches (82) as necessary, depending on the type of cleaning to be carried out.
8. Start cleaning, by moving the machines as shown in step 3. If necessary, adjust the maximum speed with the adjuster (78).

Stopping the machine

9. Stop the machine with the handlebar (2) (only for RAZOR 20).
Stop the machine by releasing the paddle (77) (only for RAZOR 20T).
10. Turn off the brushes/pad-holders and the vacuum system by pressing the switches (71) and (73).
11. Lift the brush/pad-holder deck by pressing the pedal (11).
12. Lift the squeegee (25) with the lever (10).
13. Make sure that the machine cannot move independently.
12
INSTRUCTIONS FOR USE
9097063000(1)2007-06 RAZOR 20 - RAZOR 20T