Introduction; Parts And Service; Rating Plate; Unpacking The Machine - KENT S12 Mode D'emploi

INTRODUCTION

This manual will help you get the most from your KENT vacuum cleaner.
Read it thoroughly before operating the machine. This product is intended for commercial use only.

PARTS AND SERVICE

Repairs, when required, should be performed by your Authorized KENT Service Center, who employs factory
trained service personnel, and maintains an inventory of KENT original replacement parts and accessories.
Call the KENT DEALER named below for repair parts or service.
Please specify the Model and Serial Number when discussing your machine.
(Dealer, affi x service sticker here.)

RATING PLATE

The Model Number and Serial Number of your machine are shown on the rating plate on the machine.
This information is needed when ordering spare parts for the machine. Use the space below to note the Model
Number and Serial Number of your machine for future reference.
MODEL NUMBER____________________________________
SERIAL NUMBER ___________________________________

UNPACKING THE MACHINE

When the machine is delivered, carefully inspect the shipping carton and the machine for damage.
If damage is evident, save the shipping carton so that it can be inspected.
Contact the KENT Customer Service Department immediately to fi le a freight damage claim.
USA: KENT Inc. 14600 21st Avenue North, Plymouth, MN 55447-3408, Tel.: (763) 745 3500
Canada: KENT Canada Company, 396 Watline Avenue, Mississauga,
Ontario, L4Z 1X2, Tel.: 905-712-3260
TECHNICAL SPECIFICATION
(as installed and tested on the unit)
Model
Voltage
Rated Power
Protection class (electrical)
Sound Pressure Level
Total weight
S12, S15
GU 12 SMU,
GU 15 SMU
V/Hz 110-120/50-60
W 1000
I
dB(A) 69
lbs/Kg 17/7.7
D12, D15, D18
GU 12 DMU,
GU 15 DMU,
GU 18 DMU
110-120/50-60
1200
I
69
18.7/8.5
7