Grillo PRINCESS 9 Mode D'emploi Et Maintenance page 8

IDENTIFICATION AND AFTER-SALES SERVICE
TECHNICAL DATA
ENGINES
PRINCESS 9 M1: ROBIN SUBARU EX17; HONDA GC160-GX160.
PRINCESS 9 MR: ROBIN SUBARU EX17; HONDA GC160-GX160.
PRINCESS 9 2 MR: ROBIN SUBARU EX17; HONDA GC160-GX160.
PRINCESS 9 PRO 2 MR: ROBIN SUBARU EX17; HONDA GX160.
GEARBOX
PRINCESS 9 M1: one gear
PRINCESS 9 MR: 1 forward speed + 1 reverse speed.
PRINCESS 9 2 MR: 2 forward speed + 1 reverse speed.
PRINCESS 9 PRO 2 MR: 2 forward speed + 1 reverse speed.
Start: Pull starter with automatic rewind.
Final drive: sprocket and chain.
Clutch: with control lever on handlebar, acting on belt stretcher.
Handlebar: with vertical and lateral adjustment.
Cultivator head housing: in press-formed plate sections, secured by screws.
Cultivator head: Ø 330 with six hoes plus disk width 80 cm, adjustable disk 92 cm only for model 2 MR PRO.
Travel wheel: at front, supplied as standard.
Safety devices: Machine cutout on handlebar release, mudguards, handlebars and pulley-guards as
standard; exhaust guard.
Weight: 56 kg (M1), 62 kg (MR), 65 kg (2MR), 85 kg (Pro 2MR).
Accessories:
Combined furrower: This implement is designed to form shallow trenches for sowing or irrigation. It
AFTER-SALES SERVICE
This handbook provides instructions for use of the cultivator and for correct basic servicing which the
user can carry out himself.
For all procedures not described in this handbook, contact your local dealer.
SPARE PARTS
Always use original spare parts, as they are the only ones to offer complete safety and interchangeability.
Always state the serial number when ordering.
WARRANTY
The Warranty is provided according to and governed by Applicable Law.
For the engine, the provisions of the relative manufactures apply.
WE ADVISE YOU TO KEEP THE FOLLOWING SPARE PARTS TO HAND
1 set of belts
1 throttle lever
ORDERING SPARE PARTS
Always state the machine serial number and the code number of the part to be replaced.
Contact your local dealer or our own stores. Our address is:
GRILLO S.p.A.
Via Cervese 1701 - 47521 CESENA (FC)
Tel. 0547/633111 - Fax 0547/632011
E-mail: grillo@grillospa.it - Http://www.grillospa.it
IDENTIFICATION
The cultivator chassis carries a nameplate with the machine's serial
number. This number must be mentioned whenever you request
after-sales service or order spare parts.
8