Using Your Dishwasher; Loading The Salt Into The Softener - Pando PLB-7160 Manuel D'installation

Masquer les pouces Voir aussi pour PLB-7160:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING YOUR DISHWASHER

Before using your dishwasher :
1. Set the water softener

2. Loading the salt Into the softener

3. Loading the basket
4. Fill the
detergent
Loading The Salt Into The Softener
NOTE:
If your model does not have any water softener, you may skip this section.
Always use salt intended for dishwasher use.
The salt container is located beneath the lower basket and should be filled as
explained in the following:
WARNING
Only use salt specifically designed for dishwashers use!
Every other type of salt not specifically designed for dishwasher use,
especially table salt, will damage the water softener. In case of damages
caused by the use of unsuitable salt the manufacturer does not give any
warranty nor is liable for any damages caused.
Only fill with salt before running a cycle.
This will prevent any grains of salt or salty water, which may have been
spilled, remaining on the bottom of the machine for any period of time,
which may cause corrosion.
Inside
Outside
dispenser
12

Publicité

Table des Matières
loading

Table des Matières