Publicité
Les langues disponibles
Les langues disponibles
19.0 cu. in. 2-Bolt Hydraulic disc Valve Geroler Motor
8490690
TOOL USE AND CARE
1. Use the right tool for the job. Do not attempt to force a small
tool or attachment to do the work of a larger industrial tool.
The tool will perform better and more safely at the task for
which it is intended.
2. Maintain tools with care. Keep tools clean and in good
condition for better and safer performance. Follow the
instructions for tool lubrication and changing accessories.
Periodically inspect the tool fittings and alignment for
damage, and have necessary repairs and replacements
performed by an authorized technician. Properly maintain
the tool to reduce the risk of binding. Applying excessive
force could result in slips, personal injury, and damage to
your workpiece.
3. Use only the lubricants that are supplied with the tool
or those that are specified by the manufacturer. Other
lubricants may not be suitable, may damage the tool, and
may even cause the tool to explode.
4. When not in use for an extended period, apply a thin coat of
lubricant to the steel parts to prevent rust.
5. Maintain the label and the nameplate on the tool - these
carry important information. If unreadable or missing,
contact Princess Auto for a replacement.
UNPACKING
1. Carefully remove the device from the package.
a. Retain the packing material until you have carefully inspected
and satisfactorily installed or operated the device.
2. Make sure that all the items in the parts list are included.
3. Carefully inspect the parts to make sure the device was not
damaged during shipping.
WARNING! If any parts are missing, do not operate the device
until the missing parts are replaced. Failure to do so could result
in serious personal injury.
Visit www.princessauto.com for more information
V 3.03
7
Publicité
