Publicité
Les langues disponibles
Les langues disponibles
19.0 cu. in. 2-Bolt Hydraulic disc Valve Geroler Motor
V 3.03
Oil flow is controlled with a directional control valve built into the
hydraulic circuit. Flow control valves reduce the flow rate of oil
from the hydraulic system to the hydraulic motor.
The higher the load on the motor, the lower the motor's RPM.
Ensure that the correct size geroler motor is selected for the task.
A geroler motor with a larger displacement will provide
greater torque.
MAINTENANCE
1. Maintain the device with care. A device that is in good
condition will be more efficient, easier to control, and will
have fewer problems.
2. Periodically inspect the device's components. Have damaged
or worn components repaired or replaced by an
authorized technician.
3. Follow instructions for lubricating and for
changing accessories.
4. Immediately replace damaged parts using only identical
replacement parts.
5. Maintain the device's label and nameplate - these carry
important information. If missing or unreadable, contact
Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the
device. An improperly repaired device may present a hazard to
the user and/or others.
18
For technical questions call 1-800-665-8685
8490690
Publicité
