Publicité
Les langues disponibles
Les langues disponibles
EN
INITIAL OPERATION
Configuring the wireless
outlet switch to match a
wireless transmitter
a.) Plug the wireless outlet into a regular
230 VAC mains outlet. LED (1) will
immediately start to flash.
b) Before LED (1) stops flashing, press the
"ON" button of the desired switch channel
on the wireless transmitter for which the
wireless outlet must be configured. The
red LED (1) flashes. This indicates that
the process of configuration has been
successfully completed.
Configuring a wireless outlet
switch to match several
wireless transmitters
Up to 8 wireless transmitters can be
configured for use with the wireless outlet.
12
a.) Plug the wireless outlet into a standard
230 VAC / 50Hz mains outlet and press
button (2) until LED (1) flashes red.
b.) Before LED (1) stops flashing press the
"ON" button of the desired switch channel
on the wireless transmitter, for which the
wireless outlet is being configured. The
red LED (1) light will flash. This indicates
that the configuration process has been
successfully completed.
c.) Repeat these steps for other wireless
transmitters
Delete already configured
wireless transmitters on
the wireless outlet
Already configured channels can also
be deleted.
Publicité
