EN
OPERATION
a.) Connect a device to the front outlet (3).
b.) Please read the chapter titled "Technical
Details" to learn more about the maximum
capacity of the device.
c.) Operating the corresponding "ON" or "OFF"
button of the switch channel at the wireless
transmitter will cause the wireless outlet to
be switched on (LED (1) will flash) or off
(LED (1) will go off).
d.) The wireless outlet can be manually
switched on or off using the "ON/OFF"
button (2) located at the front.
SERVICING AND CLEANING
Servicing or repair works can only be
performed by a qualified person or at
a special service centre. There are no
components in the product that need
to be serviced. At no point must it be
14
opened or dissembled given the danger
of electric shock.
The external surface can be cleaned by
•
using a dry, soft and clean cloth. Do not
press too hard on the front panel or on the
casing, as this can leave scratch marks on
the surface.
•
Dust can be easily removed by using a soft
and clean brush with long hairs and bristles
and a vacuum cleaner. In no event must an
aggressive cleaning agent or other chemical
solutions be used since that can affect the
casing or impair its proper functioning.
DISPOSAL
Dispose of the product at the end of its
lifespan in compliance with the valid
statutory provisions.