Troubleshooting - Deltafox DP-EWC 2415 Traduction De La Notice D'utilisation Originale

Troubleshooting

Always unplug the shredder before working on it. Risk of electric shock!
Problems
Device doesn't
start
Grinding tool
does not move
although the en-
gine is runningt
Engine is slower
and stops
Grinding disc
does not rotate
smoothly, abnor-
mal noises can
be heard
Possible Cause
Mains voltage missing
Main circuit breaker is
tripped
On/off switch (
be defective
Engine faulty
Hexagon bolt (
Workpiece, remaining work-
pieces block drive
Device is overloaded
through workpiece
Hexagon bolt (
Cutting discs are defective
Error correction
Check the socket, mains cable,
line, mains plug, repairs to be car-
ried out by qualified electrician
if necessary, check main circuit
breaker.
3) may
Repair by Customer Care
9) loose Tighten the hexagon bolt (see "In-
stalling/changing the cutting discs")
Remove blockages
Reduce pressure on cutting tool
Workpiece unsuitable
9) loose Tighten the hexagon bolt (see "In-
stalling/changing the cutting discs")
Change cutting discs
GB
81