General Description; Extent Of The Delivery; Functional Description; Overview - Deltafox DP-EWC 2415 Traduction De La Notice D'utilisation Originale

GB

General description

The illustrations can be found on
page 2-3.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Device
- 5 diamond cutting discs
- Dust collection kit: Suction hose, dust
bag and hose clamp
- Open-ended spanner AF 14
- Open-ended spanner AF 30
- 5 spacer discs
- Storage case
- Instruction manual

Functional description

The wall chaser cuts grooves in brickwork
using 2-5 parallel cutting discs, without re-
quiring the use of water. Cabling grooves
can be opened up by removing the mate-
rial in between the grooves.
Please refer to the information from the
disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.

Overview

1 Rear handgrip
2 Switch lock
3 On/off switch
4 Mains plug
5 Rear roller
6 Vacuum connector
7 Cutting disc
8 Pressure disc
9 Hexagon bolt (left-hand thread)
66
10 Direction arrow (protective hood)
11 Protective hood
12 Front roller
13 Front handgrip
14 Locking lever
15 Dust collection kit
16 Open-ended spanner AF 14
17 Open-ended spanner AF 30
18 Drive shaft
19 Spacer discs
20 Direction arrow (cutting disc)
21 Hose clamp
22 Screw (hose clamp)
23 Dust bag receptacle
24 Dust bag
25 Suction hose
26 Closure (dust bag)
27 Intake (vacuum connector)

Technical data

Wall chaser .......................DP-EWC 2415
Rated input voltage.............230 V~, 50 Hz
Connected load ........................... 2400 W
Idle speed (n)..............................8000 rpm
Dimension of the
cutting discs .......... Ø 150 x 2,4 x 22,2 mm
Groove depth ............................ 8 - 43 mm
Groove width ..................8 mm bis 26 mm
Spindle thread ....................................M14
Weight............................................. 7.8 kg
Safety class .........
Protection category........................... IP 20
Sound pressure level
(L ) ........................97 dB(A); K
pA
Sound power level (L
measured ............ 108 dB(A); K
Vibration (a ) ....... 10.94 m/s
h
The vibration values represent maximum
values which have been determined with
the supplied blade. The actual vibration
II (Double insulation)
= 3 dB
pA
)
WA
= 3 dB
WA
; K= 1.5 m/s
2 2