Publicité
Les langues disponibles
Les langues disponibles
Caution: Unit gets hot. NEVER touch outer surfaces, including the glass door. Always
use oven mitt or pot holder.
SLIDE RACK POSITIONS
There are 4 possible positions for the slide racks. There is an upper and a lower slot;
the rack can also be inverted for 2 additional positions.
Position 1: Use lower slots along oven walls. Insert rack using a rack-down
position.
Position 2 : Use lower slots along oven walls. Insert rack using a rack-up
position.
Position 3: Use upper slots along oven walls. Insert rack using a rack-down
position.
Position 4 : Use upper slots along oven walls. Insert rack using a rack-up
position.
Caution: Unit gets hot. NEVER touch outer surfaces, including the glass door.
Always use oven mitt or pot holder.
Note: You have 10 seconds for selecting the temperature and time. If you exceed
this time, the display will change back to the default (0 00) temperature and
time; simply repeat steps 1 - 5 below to begin again.
Note: You can stop the cooking at any time by pressing the I/o button.
BAKE FUNCTION
Selecting Cooking Temperature and Time
1. Press BAKE
(180°C) default temperature flashes on the digital display.
2. To change the temperature, immediately press ▲ or ▼ button until you reach
desired temperature.
Note: Cooking temperature can be adjusted from 200˚F to 450˚F (93˚C - 232˚C).
• Tap button and release to change in increments of 5 degrees.
• Press and hold button to change rapidly in increments of 25 degrees.
3. To set the cooking time, press the TIME
unit, the default cooking time of 0:30 (30 minutes) flashes on the display;
otherwise it will display the last selected time.
4. Immediately press ▲ or ▼ button to select desired time up to a maximum
of 2 hours.
• Tap button and release to change in one-minute increments.
• Press and hold button to change rapidly in 10-minute increments.
5. once you have set desired temperature and time, press I/o button.
• digital display flashes lo and PReHeAT until the unit reaches 150˚F (65˚C),
then it flashes temperature until the set temperature is reached.
6. o pen oven door. Insert food to be cooked or heated on bake pan or pizza pan
into the oven.
7. Close oven door.
Important: You cannot change the temperature or time during the preheat
cycle. Once unit reaches selected temperature, then you can change them at
any time. For your convenience, the unit always remembers the last selected
setting, unless unplugged.
6
button. The unit beeps, on indicator light blinks and 350°F
button. If you just plugged in the
Publicité
