General IRT670 Mode D'emploi page 4

IRT670 Manual-FINAL3-050608:Layout 1
LCD AND CONTROL PANEL:
1. Laser/Buzzer On/Off
2. Low Battery
3. Data Log
4. T/Emissivity
5. High/Low Alarm
6. Memory Key
7. Down Button
8. SCAN/HOLD/AUTO
9. °F/°C Indication
10. Main Temperature
Display
11. Max/Min/Avg
12. Set/Record Value
13. Lock Key
14. Mode Key
15. Up Button
5/6/08 9:40 AM
OPERATION FUNCTIONS:
To operate the advanced functions of the unit, press the
MODE button to change the functions. The sequential
operations and the corresponding explanations are shown
in the following chart.
OPERATION MODE
• Scan and display the
temperature during
measurement
• The maximum temperature
within one shot measuring
• The minimum temperature
within one shot measuring
• The average temperature
within one shot measuring
• The highest and lowest
temperature difference within
one shot measuring
• Recall the stored data by
using L or M button
Parameter Setup Mode
• Emissivity for more accuracy
on different materials
• Highest alarm temperature
setting
• Lowest alarm temperature
setting
Page 4
(*The parameters are
adjusted by using
L or M buttons)