Publicité
LIPO FLUG-AKKU LADEN
1. Turn the helicopter off.
2. Charging via transmitter:
Put down the charging wire cover of the controller and put out the
charging wire, then put it into the interface of the helicopter. The
LED on the controller "CHA" will turn on. The charging time is about
50 - 60 minutes.
When the charging is completed, the LED on the controller "CHA"
will turn off.
Charging via transmitter:
Charging via USB cable:
3. Charging via USB cable:
Put the USB charging wire into your computer USB interface, the
charging wire will be lightened. Put the other side of the USB
charging wire into the helicopter's interface. The USB charging wire
light will be turned off. The charging time is about 50 - 60 minutes.
The charging wire light will turn on, then the helicopter is fully
charged.
Charging cable
Charge Plug
17 // GB
Publicité
