Delabie TEMPOMATIC PRO 20164 Mode D'emploi page 11

MAINTENANCE AND CLEANING
• Cleaning chrome: do not use abrasive, chlorine or acid-based cleaning products. Clean with soapy
water using a cloth or a sponge.
• Frost protection: drain the pipes and operate the mixer/tap several times to drain any remaining
water.
REMEMBER
• Our mixers/taps must be installed by professional installers in accordance with current
regulations and recommendations in your country, and the specifications of the fluid engineer.
• Sizing the pipes correctly will avoid problems of flow rate, pressure loss and water hammer
(see calculation table in our brochure and online at www.delabie.com).
• Protect the installation with filters, waterhammer absorbers and pressure reducers to reduce the
frequency of maintenance (recommended pressure: 1 to 5 bar).
• Install stopcocks close to the mixer/tap to facilitate maintenance.
• The pipework, stopcocks, bib taps and all sanitary fittings should be checked at least once a year, and
more frequently if necessary.
Product conforms to current European Directives.
For UK market only: Tel. 01491 821 821 email: technical@delabie.co.uk
For all other markets: Tel. +33 (0)3 22 60 22 74 email: sav@delabie.fr
The most recent version of this installation guide is available on: www.delabie.com
After Sales Care and Technical Support:
EN