Before First Use
• Remove all packaging material and check whether the
appliance is complete.
• Fully unwind the power cord.
• C lean the detachable parts as described under Cleaning
and Care.
• Place the appliance on an even and heat resistant surface
and connect it to a properly installed wall socket.
• Before making your first coffee, rinse the unit by filling the
water tank (2) up to the Max. marking and operate it 2-3
times without coffee. After that your coffee maker is ready
for operation.
Note: After each rinse cycle, the appliance has to be switched
off for approx. 5 minutes, in order to cool down.
Warning: Plastic bags are a danger to toddlers and
babies, therefore keep them away to avoid suffocation.
Operation
Brewing Coffee
Using a Paper Filter
Note: Never open the appliance lid (1) during operation
– hot water could evaporate – Danger of serious burns!
1. Place the appliance on an even and heat resistant surface
and connect it to a properly installed wall socket.
2. Open the appliance lid (1) and fill the water tank (2) with
cold, fresh tap water. the markings on the water tank
(2) indicate the required water level to brew the desired
number of cups. Do not exceed the Max. filling level (12
cups).
18