Jimmy H9 Flex Mode D'emploi page 9

The product is equipped with dust content
sensor. On LED screen bottom there is a light
strip to display the dust content. As dust content
decreases from high to low, the red colour
decreases and blue colour increases. When the
strip is completely blue, the cleaning surface is
clean. Cleanness of the cleaning surface can be
visually displayed through LED screen.
Use of Flexible Metal Tube
The flexible metal tube has two modes: vertical
and bending. The vertical mode is equivalent to
the normal metal tube. The bending mode can
be used for cleaning under the table bottom,
bed bottom, etc. When the bending mode is
needed, press the bending button as shown in
the g picture, and the metal tube can achieve
0-90°bending angle.
Use of electric floor head
Electric floor head is suitable to clean all kinds of
floor like hard floor, tile and carpet etc. Product
comes with an extra carpet brushroll can be
replaced to the floor head to deep clean carpet.
Attention: During the operation of the electric floor head,
if there is a large volume of foreign matter inhaled or
too much fiber wound, or even a child in the play of
the machine mistakenly put his hand into the nozzle,
resulting in the brushroll abnormal stop, the electric floor
head will stop working, in order to protect personal safety
and brush motor.
Use of accessories
Crevice tool: suitable for cleaning crevice, door
or window corners and other narrow gaps.
Upholstery tool: suitable for cleaning closet,
windowsill, sofa and table surface.
7
min
Eco
min
Turbo
8
9
Combination brushroll
10
min
Auto
min
Max
Bending button
Carpet brushroll
7