Jimmy H9 Flex Mode D'emploi page 7

Accessories Connection List
Use of Vacuum
Charging
Attention: When use the product for first time, battery
power is not full. Need to charge the vacuum before
using.
Charging holder assembly
Put the vacuum cleaner in the holder, and lean the
4
Charging holder
vacuum cleaner against the wall, place the holder in
Expansion pipe
the position that vacuum cleaner floor head does not
touch ground. Take off the handheld vacuum cleaner,
place expansion pipe on the wall and place the holder
to the expansion pipe position, then lock in the screw.
Screw
After assembly completed, put the vacuum to charger
holder to charge or store.
Attention: Do not fix the holder to bathroom or other humid
① ② ③
wall.
5