Télécharger Imprimer la page

HumanTechnik PRO LOOP C A-4246 Mode D'emploi page 16

Publicité

Les langues disponibles

Les langues disponibles

6.1 First-time operation
Before you switch on the device, please turn all the control knobs as far to the left as
possible.
Please note that the amplifier does not have an on/off switch and will switch on as soon as
the power cord is plugged into the wall outlet.
Now connect the power cord that came with the device.
The indicator for the power supply (6) will light up.
Before you adjust the Line level, please don't forget to send a test signal to the inputs.
Adjust the level of the Line-In inputs one after the other so that the input signal control
lamp (1) lights up on the front for the program peaks of the signal source.
Then increase the power control (5) until the loop control lamp (2) lights up on the front of
the device.
Using the earphone jack (7) to listen directly and, if necessary, adjust the treble with the
treble control (4).
6.2 Adjusting the field strength
You will need a field strength gauge (special accessory) to calibrate the system correctly
according to the IEC 60118-4 standard.
7. Garantie
The induction loop amplifier exhibits very high operating safety. Should a malfunction occur
despite the unit having been set up and operated correctly, please contact your dealer or the
manufacturer directly. This warranty covers the repair of the product and returning it to you
free of charge. It is essential that you send in the product in its original packaging, so do not
throw the packaging away.
The warranty does not apply to damage caused by incorrect handling or attempts to repair the
unit by people not authorised to do so (destruction of the seal on the unit).
Repairs will only be carried out under warranty if the completed warranty card is returned
accompanied by a copy of the dealer's invoice/till receipt.
Always specify the product number in any event.
8. Disposal of used electric and electronic units (applicable in the countries of the
European Union and other European countries with a separate collection system).
The symbol on the product or the packaging indicates that this product is not to be
handled as ordinary household waste but has to be returned to a collecting point
for the recycling of electric and electronic units. You protect the environment and health of
your fellow men by the correct disposal of this products. Environment and health are endan-
16 English

Publicité

loading