Honeywell QUIETSET HSF600 Serie Manuel Du Propriétaire page 3

ASSEMBLY INSTRUCTIONS
Fig.3
B. SECURING THE FAN TO THE BASE
• Extend the silver pole to its full length, place the
fan pole into the base. (Fig. 4).
• Align the pole in the base using tabs as a guide.
• Gently place base on its side. (Fig. 5).
• Insert and tighten the L shaped bolt and washer
on the bottom of the fan base. (Fig. 6).
• Tighten by turning clockwise. (Fig. 6).
Fig.4
A. BASE ASSEMBLY
• Remove the L shaped bolt (counter clockwise) and
washer from the bottom of the silver fan pole. (Fig. 3).
Fig.5
Fig.6
3