STORZ & BICKEL MIGHTY Mode D'emploi page 56

X When cleaning the Cooling Unit
Cap in isopropyl alcohol, remove
the Cap Lock by pulling it up on one
side.
The signet hologram on the cap
i
lock is a sticker.
X Unscrew the Cooling Unit base
from the Vaporizer by turning it 90°
counterclockwise.
7 C L E A N I N G
X Lever out the large Base Seal Ring
with Filling Chamber Tool at the re-
cess in the groove.
X Remove the small Base Seal Ring.
X Press the upper Screen with the
Filling Chamber Tool from the top
to the bottom out of the Cooling
Unit base.
56