Publicité
Les langues disponibles
Les langues disponibles
9.
Bring the appliance upright again and refit the door onto the lower hinge. Make sure that the
hinge is correctly inserted into the door. Then, transfer the lower door hole covers from left to
right.
10.
Screw the middle hinge down tight.
11.
Refit the upper door. Make sure that the door is horizontally and vertically aligned so that the
seals are tight on all sides before tightening down the upper hinge. Then insert the hinge and
screw it onto the top of the appliance.
12.
Reclip the hinge cover and refit the hole cover onto the top of the appliance.
13.
Make sure that the seals are not deformed and that the doors close properly. If this is not the
case, remove the seals from the refrigerator and the freezer doors. Pivot and refit them.
Publicité
