Rollei Profi Funk-Sender Instructions page 47

Canon mixed mode
• In this mode you can set different flash groups in different flash modes and
power . Flash groups that are in TTL mode can do ETTL if a Canon camera is
used and iTTL if a Nikon camera is used .
• If a Canon camera of the A series is used, the manual mode cannot be set
while the wireless mode is turned off . TTL and M (manual) can only be set by
the transmitter setting .
• This mode should be used if the rear curtain sync is chosen .
2. Only available for Canon Cameras of the series A
(camera exposure mode needs to be P/AV/TV/M)
1) Enter the menu of your camera to select the external flash control function
setting .
2) In this mode the camera shows the information as shown below .
47